# [deprecated] Plumbus

![](https://lore.hackem.cc/api/files.get?sig=eyJhbGciOiJIUzI1NiIsInR5cCI6IkpXVCJ9.eyJrZXkiOiJ1cGxvYWRzLzFlMTE2ZjE4LTgyNDUtNDgxYi05YjhkLWNlMWQ3ZGExZTJmYS9jZWEzMDg4Ny00OWFlLTQ5ZTgtOGU5NS04Njk0ZTBlNGEyMDEvcGx1bWJ1cy5qcGciLCJ0eXBlIjoiYXR0YWNobWVudCIsImlhdCI6MTc5MTExNzAwMCwiZXhwIjoxNzkxMjAzNDAwfQ.XLQUJZlOFHirP6spfqnn_dl9u45SBfEg8BqS4Ij1Msg)

* Веб интерфейс: [http://printer-plumbus.lan](http://printer-plumbus.lan/)
* Конфиги: <https://github.com/hackerembassy/printer-plumbus/>

## About

Plumbus - Printer brought into space by @the_mihalich

## Specification

That’s basically Zav Pro 3 or something along those lines:

<https://www.zav3d.ru/products/39837907>

Hotend is fullmetal.

## GCode

Universal GCode preambles for our printers apply:

```bash
; Start
START_PRINT FIRST_LAYER_EXT_TEMP=[nozzle_temperature_initial_layer] FIRST_LAYER_BED_TEMP=[bed_temperature_initial_layer_single] BRIM_WIDTH=[brim_width]
```

```bash
; Finish
FINISH_PRINT
```

---

**Documents**

- [О нас](https://lore.hackem.cc/s/main/doc/o-nas-QY4JnnQznQ)
- [Проекты](https://lore.hackem.cc/s/main/doc/proekty-Dui8Tsngs3)
- [Donate](https://lore.hackem.cc/s/main/doc/donate-F24cOiaMOW)
- [Оборудование спейса](https://lore.hackem.cc/s/main/doc/oborudovanie-spejsa-anMybBFat1)
- [Интернет-провайдеры Еревана](https://lore.hackem.cc/s/main/doc/internet-provajdery-erevana-bOQ36Lkh5q)
- [Всякое разное](https://lore.hackem.cc/s/main/doc/vsyakoe-raznoe-2nLdUtbhBz)
- [Поваренная Книга](https://lore.hackem.cc/s/main/doc/povarennaya-kniga-WJ9G0aZNzz)