# Oda - Sovol SV07

web adress (local): <http://10.13.37.151:81>   


config repository: <https://github.com/hackerembassy/sovol-sv07-oda-configuration-files>  

presets: [https://github.com/hackerembassy/orca-slicer-presets (WIP)](https://github.com/hackerembassy/orca-slicer-presets(WIP))


Donated to Hacker Embassy with symptoms of Z-axis not homing. (Fixed by reducing Z homing speed).  Printer Migrated to  Amrbian Trixie Sovolized image by Torte.   

## OS / Firmware

The printer originally shipped on Sovol's factory image: Armbian, Debian **Buster**, on the MKS Klipad50 (an MKS-PI derivative board). That image is a dead end — Buster's repos are EOL for this board and no new packages can be installed against it.

We replaced it with **torte71's "Sovolized" Armbian image**, a community-maintained rebuild specifically for Sovol SV06/SV07 + Klipad50/MKS-PI boards, currently on **Debian 13 (Trixie)**, kernel 6.12.41:

* Release page: <https://github.com/torte71/mksklipad50-klipper-images/releases>
* Image details / changelog: <https://torte71.github.io/tmteststuff/image.html>
* How the image is built (reference, not required reading): <https://torte71.github.io/tmteststuff/rebuilding.html>
* Background on why Sovol's Buster image is a dead end: <https://torte71.github.io/InsideSovolKlipperScreen/armbian-mkspi-setup-v24-2.md>

The image ships with the whole stack preinstalled via KIAUH — no manual KIAUH setup needed:

| Component | Version (as shipped) |
|-----------|----------------------|
| KIAUH     | preinstalled         |
| Klipper   | v0.13.0-213          |
| Moonraker | v0.9.3-102           |
| Mainsail  | v2.14.0              |
| Fluidd    | v1.34.3              |
| KlipperScreen | v0.4.6-11            |
| Crowsnest | v4.1.16-1            |
| Makerbase/Sovol extras | `makerbase-beep-service`, `makerbase-automount-service`, `makerbase-soft-shutdown-service`, PLR (powerloss recovery) |

### MCU firmware

Flashing the host image is not enough — the physical printer mainboard MCU needs its own firmware flash or Klipper won't connect (version mismatch error). The image ships a precompiled `klipper*.bin` in `/root` on the eMMC for this.

**Process** (not a same-device copy — it goes host → SD card → mainboard):


1. Copy the `.bin` off the eMMC (SCP, or via Mainsail/Fluidd file browser).
2. Rename it — must end in `.bin`, and must be a **new filename** not previously used (the board remembers flashed filenames and won't re-flash a repeat).
3. Put it on a separate FAT32 SD card, insert into the **mainboard's own SD slot** (on the SV07 this means removing the front panel — it's not the eMMC/host slot).
4. Power-cycle and wait up to \~5 minutes for the bootloader to auto-flash.
5. Confirm in Mainsail's Machine panel that `mcu`, `mcu-rpi`, and host Klipper versions all match.

Reference: <https://torte71.github.io/InsideSovolKlipperScreen/updating_klipper.html>

Beginner-friendly walkthrough: <https://github.com/vasyl83/SV07update>


---

## UI / Usability

* External fan on the mainboard - fixed cooling and printer crashes. 
* **Print preview thumbnails** — working, showing on KlipperScreen and Fluidd.
* **Bed mesh** — working.
* Nozzle Wiper present, Macro generated, and implemented.
* Webcam installed and configured, decent FPS, low resolution. Mounted near Klipperscreen. 
* Mounted cable support spine in Edie’s signature orange
* Mounted a more compact, lighweight LED strip holder for the extruder in Edie’s signature orange
* Mounted extruder movement knob of funky design in Edie’s signature orange
* Basic PETG/PLA Presets have been derived. 


---

---

**Documents**

- [О нас](https://lore.hackem.cc/s/main/doc/o-nas-QY4JnnQznQ)
- [Проекты](https://lore.hackem.cc/s/main/doc/proekty-Dui8Tsngs3)
- [Donate](https://lore.hackem.cc/s/main/doc/donate-F24cOiaMOW)
- [Оборудование спейса](https://lore.hackem.cc/s/main/doc/oborudovanie-spejsa-anMybBFat1)
- [Интернет-провайдеры Еревана](https://lore.hackem.cc/s/main/doc/internet-provajdery-erevana-bOQ36Lkh5q)
- [Всякое разное](https://lore.hackem.cc/s/main/doc/vsyakoe-raznoe-2nLdUtbhBz)
- [Поваренная Книга](https://lore.hackem.cc/s/main/doc/povarennaya-kniga-WJ9G0aZNzz)