# Shaytan - Creality K2

Owner: krikun98 

web-address: <http://printer-shaytan.lan:4408/#/> 

Presets for OrcaSlicer: <https://github.com/hackerembassy/orca-slicer-presets> (Shaytan presets are to be tuned and updated as time goes on)


Official UserGuide:  
<https://wiki.creality.com/en/k2-flagship-series/k2>


How to filament (simple instruction)  
  
 ![](https://lore.hackem.cc/api/files.get?sig=eyJhbGciOiJIUzI1NiIsInR5cCI6IkpXVCJ9.eyJrZXkiOiJ1cGxvYWRzL2M5ZDU2ODViLTgwMWItNGI2ZS1hNmY1LWQ2NTJhMjY1NDdjOC9kMWEwMWNkMS01MzQzLTQyYTgtOWExZi00NTBkNzdiZDM0ZDIvaW1hZ2UucG5nIiwidHlwZSI6ImF0dGFjaG1lbnQiLCJpYXQiOjE3OTExMTcwMDAsImV4cCI6MTc5MTIwMzQwMH0.SMjI58dtRZGJPXvo0yjqi98YFjlKiuBw80ZJWWbP2QM " =975x582")


 ![](https://lore.hackem.cc/api/files.get?sig=eyJhbGciOiJIUzI1NiIsInR5cCI6IkpXVCJ9.eyJrZXkiOiJ1cGxvYWRzL2M5ZDU2ODViLTgwMWItNGI2ZS1hNmY1LWQ2NTJhMjY1NDdjOC81YjAxYTVmZi05N2VkLTQyNzMtYjRjOS01MGZhYmU0NDgyMDkvaW1hZ2UucG5nIiwidHlwZSI6ImF0dGFjaG1lbnQiLCJpYXQiOjE3OTExMTcwMDAsImV4cCI6MTc5MTIwMzQwMH0.-biMsX__5lSuBv07c6kmNDYTQBQXm-e2RvgCwVVEM88 " =1053x596")


Software repo:  
<https://github.com/CrealityOfficial/K2_Series_Klipper>


Camera Soft-Mod: (works)  
<https://github.com/DnG-Crafts/K2-Camera>


Misc Notes:

OrcaSlicer Upload & Print:  
  
**Host Type: Klipper**

* **Hostname: printer-shaytan.lan:7125**
* **Device UI: printer-shaytan.lan:4408** (keep this as-is, it's just the browser panel)

The "test works without port" is because without a port it defaults to 4408 (nginx), and nginx partially responds to the CrealityPrint probe. But then upload+print still breaks because the actual print-start endpoint isn't there.

With **Klipper** host type + **port 7125**, OrcaSlicer talks directly to Moonraker using the standard API (`/server/files/upload` + `/printer/print/start`) — both of which that Moonraker instance supports fine. That's your actual fix.


Print Benchmark/Calibration items:  

calibration assist vid:  
<https://www.youtube.com/watch?v=gVU5If1VsAM&list=LL&index=2>

Rotation distance calibration:  
<https://www.klipper3d.org/Rotation_Distance.html#calibrating-rotation_distance-on-extruders>  
Set to 6.792 from default 6.9

PID calibration (calibrated extruder/bed):  
<https://www.klipper3d.org/Config_checks.html?h=pid#calibrate-pid-settings>

OrcaSlicer guide:  
<https://www.orcaslicer.com/wiki/calibration/calibration_guide.html>

---

**Documents**

- [О нас](https://lore.hackem.cc/s/main/doc/o-nas-QY4JnnQznQ)
- [Проекты](https://lore.hackem.cc/s/main/doc/proekty-Dui8Tsngs3)
- [Donate](https://lore.hackem.cc/s/main/doc/donate-F24cOiaMOW)
- [Оборудование спейса](https://lore.hackem.cc/s/main/doc/oborudovanie-spejsa-anMybBFat1)
- [Интернет-провайдеры Еревана](https://lore.hackem.cc/s/main/doc/internet-provajdery-erevana-bOQ36Lkh5q)
- [Всякое разное](https://lore.hackem.cc/s/main/doc/vsyakoe-raznoe-2nLdUtbhBz)
- [Поваренная Книга](https://lore.hackem.cc/s/main/doc/povarennaya-kniga-WJ9G0aZNzz)