Thermal printer XPrinter XP-236B

About

• Adjustable print speed: Min 50.8mm/s, Max 101mm/s

• Adjustable paper width: Min 20mm, Max 60mm

• Maximum paper roll diameter: 80mm

• Support QR CODE Printing

Full Product Specification: https://www.xprintertech.com/xp-236b

How to use

The simplest way to print with it is by using NiceLabel 2017.
Then download and install a driver from here
https://www.seagullscientific.com/downloads/printer-drivers/xprinter-xp-236b/
You can also use the standard Windows printing dialog to print txt and images.

Additional soft and drivers: https://disk.yandex.ru/d/fKfWfe3v3GTAUE

Manual print

If you have a lot of free time and you a ready to learn 300 page manual about using TSPL printer language (and writing its commands directly to usb bus) you could try to tinker around with ManualPrint nodejs module in this repo. We will be grateful if you could find a way to make it a working solution.
For this solution to work you need to have libusb compatible driver installed instead of the standard one. You can install it with Zadig from here
https://zadig.akeo.ie/. Device vid = 1155, pid = 22339.

Switch modes

How to switch barcode sticker printing mode and pos receipt printing mode:

1. First, press “Pause” button, then turn on your printer

2. Release “Pause” button after the printer prints a receipt “switch to receipt mode”

3. Then press “Feed” button to finish the switch

4. And restart your printer to finish switching